D-Link DWA-55 Quick Install Guide
Package Contents
A desktop with an available 32-bit PCI slot
Windows Vista
®
, XP (Service Pack 2) or 2000 (Service Pack 4)
At least 64MB of memory and 300MHz processor
System Requirements
If any of the above items are missing, please contact your reseller.
Before installing your new D-Link wireless adapter, please verify the
following:
• Remove any previous installations of wireless adapters
• Disable any built-in wireless adapters
• Verify the settings such as the SSID and security settings of the
network(s) you want to connect to
Note:
If you’ve installed a different manufacturer’s adapter or a different model
D-Link adapter, make sure the software is uninstalled before installing the new
software. Some utilities may cause a conflict with the new software. If you plan to use
multiple adapters at different times, make sure the utilities are not set to load when
your computer boots up. Windows Vista
®
/XP users may use the built-in wireless utility
for all adapters.
Before You Begin
Installation
DWA-552 Xtreme N
™
PCI Adapter
Three (3) Antennas
CD-ROM (contains software, drivers, and manual)
Step 1:
You will need to turn off your PC to install
the card. Once your computer is turned off,
unplug the power cord from the computer.
Open the case and insert the D-Link
adapter into an available PCI slot. Once
inserted, close the case and insert the
power cable into the computer. Turn on
your computer.
Summary of Contents for DWA-552
Page 1: ......
