D-Link DW-125 User Manual Download Page 6

- 6 - 

retransmissions. 
 

PS Mode (Power Saving Mode) 

Enabling power saving mode can extend the battery life of the mobile notebook by allowing 
the USB Adapter to sleep, minimizing the power consumption. 
 

Channel 

D-Link DW-125 Wireless LAN USB Adapter supports up to 14 channels. However, the 
number of available channels varies in different countries and regions. The Access Point 
must be set to a channel. To avoid radio interference, adjacent Access Point within the 
same infrastructure network (the same SSID) should set to different channel. The channels 
of Access Points must be at least five channels apart, while the Wireless LAN USB 
Adapters automatically use the same channels as the Access Point and roams between 
APs in the same wireless network. 
 

Encryption 

The Wireless LAN USB Adapter uses WEP encryption to protect wireless data 
communications. 
 

Encryption Selection 

WEP uses a combination of 40-bit keys or 128-bit keys to provide security for every data 
transmission. In order to decode a data transmission, an identical WEP key must be used 
by each wireless client on the network. Choose Enable or Disable to activate the security of 
wireless network. 

Create with Passphrase 

The WEP keys can be generated from a user-defined passphrase. The WEP text string is a 
maximum of 32 characters. 

Summary of Contents for DW-125










Reviews: