Configuring the Connection to the Internet
Now that we have accessed the DVG-G1402S’s Web Interface we will now need to configure the router for
Internet connection. Select Home tab on top and then click on WAN button on the left.
You will see several options for different types of Internet connections. It is very common for broadband
modems to carry out the authentication process, so all you need to do on your router is to set it to the
“Dynamic IP Address” option (it is selected by default). If your provider requires PPPoE login and your
modem does not have PPPoE built in (so you had to run PPPoE client on your computer when the modem
was connected to your PC), select the PPPoE option. Specify your ISP’s account username and password.
If you have one of the recent broadband modems which are capable of handling the authentication with
your ISP, leave your router on the “Dynamic IP” option.
Click on Apply when done.
P.S. If you are connecting to Bigpond Cable you will need to select the “Dynamic IP” option in the router
and run the login software on your computer(s). We recommend using the BPALogin client:
http://www.dlink.com.au/tech/faqs/default.asp?model=DVG-G1402S&TemplateId=23678
Summary of Contents for DVG-G1402S - Wireless Broadband VoIP Router
Page 4: ......
