manualshive.com logo in svg

D-Link DVG-5008S, User Manual

Share
Download
D-Link DVG-5008S User Manual Download Page 44

 

 

SNMP 

 

 

 

Enable SNMP Agent: Enable SNMP if ticked. 

 

Get/Set/Trap Community: Enter Community name to Read, Write and Trap. 

 

Trap Host: Enter the IP of Trap Host. 

 

NTP 

This is the time setting. After the gateway is on the Internet, it will set its watch with Time Server. 

 

 

 

Time Zone: Set the Time Zone where the gateway resides. 

 

Time Server #1~#3: Set the Time Server where the gateway should sync up during start up. 
(NTP protocol) 

 

Backup/Restore 

 

You can backup settings to a file and restore settings from that file. You also can restore all settings back to 
default by selecting 

Restore Default Configurations

 and click 

Restore

. 

 

Note: It needs to Save Settings and Restart, and all settings will back up default settings or have new 

setting that you upload.

 

 

 

 

 

Configuration File: Backup the all settings. 

 

Configuration Template File: Backup the settings as template file for editing. 

Summary of Contents for DVG-5008S

























































Reviews:

No comments

Brands by name

Popular brands

Load more brands