manualshive.com logo in svg

D-Link DVG-4088S, User Manual

Share
Download
D-Link DVG-4088S User Manual Download Page 20

                                                                                                                                                                                          17 

 

PPTP

※

 

 

Select “PPTP” and enter the IP Address, Subnet mask, PPTP Server, PPTP ID and Password. 
Then click the “Accept” button at the bottom. 

Save the settings, and then restart the system. The system will take about 40 seconds to 
restart. 
If not familiar with the network connection, please contact your local ISP.Domain Name 
Server.  

 

 

BigPond (for Australia use only) 

 

Click “BigPond Cable” Enter User Name and Password. Login Server is optional.    Then click 
the “Accept” button at the bottom. 

   

 

(DNS) Settings   

 

Domain Name Server (DNS): While a gateway is accessing another gateway or computer with a 
hostname, it will look up the IP address from the DNS provided by ISP. The ISP whilst 
negotiating with PPPoE or DHCP usually assigns the DNS information. In the case that the DNS 
is not assigned automatically or WAN port is assigned with a static IP address, the DNS 
information must be assigned manually. 

Auto  : Gateway learns primary & secondary addresses from ISP’s DHCP server or PPPoE 
server. 
Manual 

: Enter the primary & secondary addresses manually. Please be sure the IP 

addresses are correct otherwise the gateway will not be able to access hosts with its 
hostname. 

 

Summary of Contents for DVG-4088S



















































Reviews:

No comments

Brands by name

Popular brands

Load more brands