background image

 
Advanced 

 

DVG-2101S User Manual 

 

 

 

 

 

33

Dynamic DNS 

The Dynamic DNS service allows you to bind the device's public IP address to 
a static hostname, allowing your computer to be more easily accessed from 
various locations on the Internet. Most broadband Internet Service Providers 
assign dynamic (changing) IP addresses. Using a DDNS service provider, your 
friends can enter in your domain name to connect to your server no matter what 
your IP address is. When this feature is enabled, this device will automatically 
update your DDNS records whenever your IP address changes. 
 

 

 

Server Address 

Enter your DDNS server’s IP address provided by your 
DDNS service provider. You can also select a pre-defined 
DDNS service provider from the drop-down list. 

Host Name 

Enter the host/domain name that you registered with your 
DDNS service provider. 

Username or 
Key 

Enter the username or key for your DDNS account. 

Password or Key 

Enter the password or key for your DDNS account. 

Verify Password 
or Key 

Re-enter the password or key for your DDNS account. 

Timeout 

Enter the DDNS timeout period in hour(s). 

Status 

This field shows the DDNS connection status as connected 
or disconnected. 

 
 

Summary of Contents for DVG-2101S



























































Reviews: