D-Link DSR-500, User Manual

Page: 184 / 213

Unified Services Router User Manual
182
sending EAPOL pdu to PNAC... DEBUG
DOT11_RX_EAPOL_KEYMSG:
unknown ifname %s
ERROR
creating pnac authenticator with values
%d %d - %s
DEBUG cmd %d not supported.sender=%d ERROR
Profile %s does not exist DEBUG inteface name passed is NULL ERROR
IAPP initialized. DEBUG BSSID passed is NULL ERROR
Encrypting context key=%s for DEBUG inteface name passed is NULL ERROR
could not find access point context for
%s
DEBUG
unable to allocate memory for
DOT11_CTX
ERROR
join event for existing node %s DEBUG unable to install wme mapping on %s ERROR
failed to send
PNAC_FORCE_AUTHORIZED "
DEBUG unable to get %s mac address ERROR
failed to send PNAC_AUTHORIZED " DEBUG Failed to set %s SSID ERROR
failed to send
PNAC_VAR_KEY_AVAILABLE (TRUE) "
DEBUG Failed to set SSID broadcast status ERROR
failed to send PNAC_VAR_KEY_TX_EN
(TRUE) "
DEBUG Failed to set PreAuth mode ERROR
failed to send PNAC_VAR_KEY_TX_EN
(FALSE) "
DEBUG unable to install key ERROR
failed to send
PNAC_FORCE_AUTHORIZED "
DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_AUTHMODE failed
ERROR
failed to send PNAC_AUTHORIZED " DEBUG
KDOT11_SET_PARAM:IEEE80211_I
OC_PRIVACY failed
ERROR
mic verification: OK DEBUG wpaInit failed ERROR
pnacIfConfig: Invalid supplicant" DEBUG
dot11InstallProfile: unable to get
interface index
ERROR
Failed to process user request DEBUG adpHmacInit(%s) failed ERROR
Failed to process user request - %s(%d) DEBUG interface %s not found ERROR
pnacIfConfigUmiIoctl: umiIoctl failed DEBUG AP not found on %s ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG keyLen > PNAC_KEY_MAX_SIZE ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG Invalid profile name passed ERROR
pnacIfConfigUmiIoctl: usrPnac returned
%d
DEBUG Creation of WPS EAP Profile failed ERROR
pnacKernNotifier: invalid PAE
configuration "
DEBUG unsupported command %d ERROR
From pnacEapDemoAuthRecv:
unsupported response "
DEBUG device %s not found ERROR
From pnacEapDemoAuthRecv: invalid
codes received
DEBUG unsupported command %d ERROR
From pnacRadXlateDemoRecv: received
unknown "
DEBUG dot11NodeAlloc failed ERROR
From pnacRadXlateDemoRecv: invalid
codes received
DEBUG Getting WPA IE failed for %s ERROR
Error from pnacRadXlateDemoRecv:
malloc failed
DEBUG Getting WPS IE failed for %s ERROR
From pnacRadXlateRadPktHandle:
received a non-supported"
DEBUG
Failed initialize authenticator for node
%s
ERROR
Only md5 authentication scheme
currently supported. "
DEBUG
Failed to get the system up time while
adding node %s
ERROR
Message from authenticator: DEBUG error creating PNAC port for node %s ERROR
from pnacPDUXmit: bufsize = %d,
pktType = %d,"
DEBUG dot11NodeAlloc failed ERROR
pnacPDUXmit: sending eap packet. code
= %d, "
DEBUG Invalid arguments. ERROR