Unified Services Router
CLI Reference Guide
121
12.35
vpn sslvpn users users delete
<ltrow_id>
S.No
Com mand Nam e
Description
Type and Description
1
<ltrow_id>
Users delete mode
Unsigned integer
12.36
vpn ipsec policy configure
<ltname>
S.No
Com mand Nam e
Description
Type and Description
1
<ltname>
vpn policy configuration mode
String
2
save
Save vpn policy configuration changes.
3
cancel
Roll back vpn policy configuration
changes.
4
exit
Save vpn policy configuration changes
and exit current mode.
5
general_policy_type
Setting policy manual or auto
vpn policy type
6
general_ike_version
Setting version ikev1 or ikev2
IPsec VPN IKE Version
7
general_ip_protocol_version
Setting protocol version ipv4 or ipv6
vpn protocol version
8
general_ipsec_mode
Setting ipsec mode for the vpn policy
VPN ipsec modes
9
general_select_local_gatew ay
Setting local gatew ay for the vpn policy
VPN gatew ay
10
general_remote_end_point_type
Set mode to IP address or Internet
Name/FQDN of the remote gatew ay or
client PC
vpn remote end point type
11
general_remote_end_point
The IP address or Internet Name/FQDN
of the remote gatew ay or client PC.
12
general_remote_end_point ip_address
The IP address of the remote gatew ay or
client PC.
IPV4 or IPv6 address
depending upon protocol
selected IPV4 or IPV6
13
general_remote_end_point fqdn
The IP address or Internet Name/FQDN
of the remote gatew ay or client PC.
String
14
general_enable_mode_config
enable/disable mode config
Boolean choice
15
general_enable_netbios
enable/disable this to allow NetBIOS
broadcasts to travel over the VPN tunnel.
Boolean choice
16
general_enable_rollover
enable/disable rollover
Boolean choice
17
general_protocol
Setting protocol esp or ah
IPsec VPN Protocol
18
general_enable_dhcp
enable/disable dhcp.
Boolean choice
19
general_local_netw ork_type
Select the IP addresses on the local side
that w ill be part of the tunnel. This can be
either a single IP address, several IP
addresses in a range, an entire subnet,
or any IP address that w ants to connect
vpn netw ork type
20
general_local_start_address
IP address from w here the range needs
to begin
IPV4 or IPv6 address
depending upon protocol
selected IPV4 or IPV6
21
general_local_end_address
IP address w here the range needs to
end
IPV4 or IPv6 address