b u s i n e s s
DSN-2100-10
iSCSI SAN Array
Technical Specifications
Features
Drive Bays
• 8
Drive Interface Support
• SATA-II Support
System Memory
• 512MB standard
Cache Memory
• 512MB standard
Battery Backup for Cache
• Standard (approximately 72 hours on full charge)
Bandwidth
• Up to 425MB/s
Storage Capacity
• 16TB Capacity with 2TB Hard Drives
Operating Systems Supported
Please see support.dlink.com for latest
support information
• Windows Vista® 32-bit & x64 (Ultimate & Enterprise) with Built-in iSCSI initiator
• Windows Server® 2003 R2 | SP1 32 & 64-bit (Standard & Enterprise) with v2.07 iSCSI initiator or later
• Windows Server 2008 Enterprise 32 & 64-bit with Built-in iSCSI initiator
• Windows XP Pro® 32 & 64-bit with v2.07 iSCSI initiator or later
• Windows 2000 Advanced Server – No MS iSCSI Initiator support, Qlogic HBA only
• Red Hat® 7.3
• Red Hat Enterprise AS update 5 (64-bit)
• Red Hat Enterprise 5 update 2 (64-bit)
• SuSE® Professional 9.3 32-bit
• SuSE Enterprise Server 10.2 32-bit
• Sun Solaris® 10 build 6/06
• IBM AIX 5L
• Microsoft Hyper-V
• VMWare ESX Server® 3.02 & 3.5
• VMWare ESX Server 4.0
• Virtual Iron v4.2
• Citrix XenServer® v4
• Mac OS X® (10.4 & 10.5)
Supported NICs, iSCSI Accelerators
and iSCSI HBAs
Please see support.dlink.com for latest
support information
• Intel® Pro 1000MT & XT [1GbE]
• Intel Pro 10000 CX4 [10GbE]
• Myricom 10G-PCIE-8A-C+E [10GbE]
• Chelsio® S310X-SR-XFP [10GbE]
• Neterion® Xframe® II & Xframe E [10GbE]
• Alacritech® SES2104ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
• Alacritech SES2102ET (drivers: SNP 9.1.0.1092 & 7.3.1.0)
• QLogic® 4010C, 4052C, & 4062C
iSCSI Network Interface
iSCSI Network Interface
• Four 1GbE Copper Ports
Host Interface
• iSCSI Draft 20 compliant initiator
Connections
• 1,024 hosts
CHAP Authentication
• Yes
Access Control of Management
• Yes
iSCSI/TCP/IP Full HW Offload
• Yes
Jumbo Frames Support
• Yes
Link Aggregation Group Support
• Yes – Up to four LAGs (Static LAG)
VLAN Support
• Up to eight 1-to-1 mapping between IP subnet and VLAN. Multiple VLANs per physical port with VLAN tag. All
physical ports in LAG belong to same VLAN (IEEE802.1Q Tag)
Flow Control
• Enabled by default
