manualshive.com logo in svg

D-Link DSL-G2452DG, User Manual, Page: 19 / 119

Share
Download
D-Link DSL-G2452DG User Manual Download Page 19

15

D-Link DSL-G2452DG User Manual

Section 3 - Getting Started

Setup Wizard (continued)

Configure your Internet connection using the drop-down menus. Select either 

ADSL 

or 

VDSL 

from 

WAN Access Type

. Use the 

Country 

and 

ISP

 drop-down menus to quickly configure 

the 

VPI

, and 

VCI 

settings. To manually configure these settings, select 

Not Listed

.

Select your ISP's 

Encapsulation 

type and 

MTU

, and click 

Next

 to continue. 

If the router detected that a username and password is required, enter your ISP's PPPoE 
username and password and click 

Next

 to continue. 

Note:

 Make sure to remove your PPPoE software from your computer. The software is no longer 

needed and will not work through a router.

PPPoE

Internet

Wi-Fi Client

DSL-G2452DG

To setup this Internet connection, you will need to have a User Name from your Internet 
Service Provider. If you do not have this information, please contact your ISP.

Next

Back

Username:

Password:

Summary of Contents for DSL-G2452DG
























































































































Reviews:

No comments