background image

Set Password

Choose a new password and then

      press 

Next

 to continue

(GMT+12:00) Wellington, Auckland

Choose time zone

Choose Wellington, Auckland and

     then press 

Next

 to continue

(This password is for access to this set up
      process if any further changes are required
so write it down and keep in a safe place
       - 

this is not your ihug internet password

)

Set PPPoE/PPPoA

Username:

your ihug [email protected]

Password:

your ihug password

type in your details then

press 

Next

 to continue

Click 

restart 

to save your settings. Your modem

will then shutdown and restart automatically.

      

You’re now ready to surf the internet!

e

f

g

h

Connection Type

PPPoA VC-MUX

Username

[email protected]

Password

Enter your 

ihug

 password

Select 

PPPoA VC-MUX

Enter your 

ihug

 username

(These details were provided to you

when you signed up to ihug)

New Password

Next

Verify Password

Next

Set up complete

Your modem is now set up to connect to the internet with ihug.

          To set up your wireless connections, please refer to the supplied

                              D-Link instruction manual

Summary of Contents for DSL-604T

Page 1: ...rt guide Before you start please check you have the following items ready DSL 604T Wireless broadband modem DSL 604T wireless modem power adapter ethernet cable phone cable line filter D Link installation guide ...

Page 2: ...ill flicker for several seconds and then light up steadily All phones in use will require a line filter Connecting the cables 1 power Screw in the modem antenna and plug in the router to the mains power with the supplied power adapter connect the The POWER LED on the front of the modem lights up 2 Ethernet port Connect the blue ethernet cable in to one of the 4 Ethernet ports on the modem and the ...

Page 3: ...DHCP DNS DSL 604T ADSL Wireless Modem Press Run Wizard to start 5 is now done The hardware setup You re now ready to configure the modem settings Complete the following steps a h starting below b Connect to settings a Enter the username admin and the password admin This password is for access to the modem configuration process and can be changed at a later stage of this set up process to your own ...

Page 4: ...ur ihug password type in your details then press Next to continue Click restart to save your settings Your modem will then shutdown and restart automatically You re now ready to surf the internet e f g h Connection Type PPPoA VC MUX Username username adsl ihug co nz Password Enter your ihug password Select PPPoA VC MUX Enter your ihug username These details were provided to you when you signed up ...

Reviews: