DSL-504T DSL Router User
’
s Guide
v
About This User
’
s Guide
This user
’
s guide provides instructions on how to install the DSL-504T ADSL Router and use it to
provide Internet access for an Ethernet LAN.
If you are using a computer with a functioning Ethernet port, the quickest and easiest way to set
up the DSL-504T is to follow the instructions provided in the
Quick Installation Guide
.
Before You Start
Please read and make sure you understand all the prerequisites for proper installation of your new
Router. Have all the necessary information and equipment on hand before beginning the
installation.
Installation Overview
The procedure to install the Router can be described in general terms in the following steps:
1. Gather information and equipment needed to install the device. Before you begin the actual
installation make sure you have all the necessary information and equipment.
2. Install the hardware, connect the cables to the device and connect the power adapter.
3. Check the IP settings on your computer and change them if necessary so the computer can
access the web-based software built into the Router.
4. Use the web-based management software to configure the device to suit the requirements
of your ADSL service and private network.
The Setup Wizard
Many users will be able to configure all the settings necessary to use the DSL-504T with the Setup
Wizard. For most ADSL users, the simplest way to setup the DSL-504T is to use the Setup Wizard
to configure the Internet connection. Once you access the web interface used to configure the
device, just launch the Setup Wizard to configure your Internet connection.