80
D-Link DSL-2900AL User Manual
Section 4 - Configuration
PPPoE
Choose
Share with IPv4
to re-use your IPv4 PPPoE username and
password, or
Create a new session
.
If you selected
Create a new session
above, enter the PPPoE
username provided by your ISP here.
If you selected
Create a new session
above, enter the PPPoE
password provided by your ISP here.
Select
Static IP
if your ISP assigned you the IP address, subnet mask,
gateway, and DNS server addresses. In most cases, select
Dynamic IP
.
Enter the IP address provided by your ISP (Static IP only).
Maximum Transmission Unit - you may need to change the MTU for
optimal performance with your ISP.
Select either
Obtain DNS server address automatically
or
Use the
following DNS address
.
If you selected
Use the following DNS address
above, enter the
primary DNS server address.
If you selected
Use the following DNS address
above, enter the
secondary DNS server address.
Enable or disable prefix delegation services.
PPPoE Session:
Username:
Password:
Address Mode:
IP Address:
MTU:
DNS Type:
Primary DNS
Server:
Secondary DNS
Server:
Enable DHCP-
PD:
Select
PPPoE
if your Internet connection requires you to enter a username and password. This information is provided by your Internet service
provider (ISP).
