D-Link DSL-2877AL Dual Band Wireless AC750 VDSL/ADSL2+ Modem Router User Manual
Section 3 - Web User Interface Configuration
Page 38
WAN - Static IP Address
Select this option to set static IP information provided to you by your ISP.
Static IP Address:
Enter the static IP address assigned to you by your ISP.
IP Subnet Mask:
Enter the IP subnet mask assigned to you by your ISP.
Gateway:
Enter the gateway assigned to you by your ISP.
MTU:
If you experience connection issues, you may need to change the MTU
setting for optimal performance with your specific ISP.
Default Route:
Specifies the default route for the WAN interface.
NAT Enable:
Enable or disable NAT function.
Enable PPPoE Passthrough:
Enable or disable PPPoE pass through function.
IGMP Proxy:
Enable or disable IGMP proxy function.
WAN - PPPoA/PPPoE
Select this option if your ISP requires you to use a
PPPoA/PPPoE
connection. This
option is typically used for DSL services. Select
PPPoA/PPPoE
to obtain an IP
address automatically for your
PPPoA/PPPoE
connection. Please enter the
information accordingly.
Please Note the image to the right shows
PPPoE
options.
PPPoA
WAN
page may
differ slightly.
Username:
Enter the username for your product.
Password:
Enter the password for your product.
Confirm Password:
Enter the confirm password.
MTU:
If you experience connection issues, you may need to change the MTU
setting for optimal performance with your specific ISP.
TCP MSS:
Specifies the maximum segment size for the PPPoE connection.
Default Route:
Specifies the default route for the WAN interface.
NAT Enable:
Enable or disable NAT function.
Enable PPPoE Passthrough:
Enable or disable PPPoE pass through function.
IGMP Proxy:
Enable or disable IGMP proxy function.
Connection:
Specifies the PPPoE connect mode.
Get IP Address:
Select the way to get IP address. It is static or dynamic.
Static IP Address:
Enter the static IP address.
IP Subnet Mask:
Enter the IP subnet mask.
Gateway:
Enter the gateway.