DSL-2750U
Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data
provided by your
Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your WAN
connection. Otherwise contact your ISP.
3G WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB
modem, then prior to creating a 3G WAN connection, proceed to the
USB
modem
menu and enter the PIN code on the page displayed
1. Go to the
Net / WAN
page and click the
Add
button.
2. In the
General settings
section, from the
Provider
drop-down list,
select your country and operator to automatically specify all settings
required to connect to the Internet. To specify all settings independently,
leave the
Manually
value.
3.
From the
Connection Type
drop-down list, select the
3G
value.
4.
Make sure that the
usb
value is selected from the
Interface
drop-down
list.
5 For GSM USB modems only. For CDMA USB modems, it is required to disable the
PIN code check on the identification card prior to connecting the USB modem to the
router.
17
