DIR-620
Quick Installation Guide
Configuring Connection to the Internet
!
You should configure your WAN connection in accordance with data
provided by your
Internet service provider (ISP). Make sure that you
have obtained all necessary information prior to configuring your
connection. Otherwise contact your ISP.
LTE WAN Connection
If the PIN code check is enabled for the SIM card inserted into your LTE USB
modem, it is required to disable the PIN code check on the identification card
prior to connecting the USB modem to the router.
An active LTE WAN connection will be automatically created on the
Net /
WAN
page when connecting a USB modem to the router. If the connection has
not been created automatically, create a new connection manually.
!
For the USB modem Megafon M100-1,
please reboot the router after
creating the WAN connection.
1. Go to the
Net / WAN
page and click the
Add
button.
2. In the
General settings
section, in the
Provider
drop-down list, leave
the
Manually
value.
3. From the
Connection Type
drop-down list, select the
LTE
value.
4. Make sure that the
USB
value is selected from the
Interface
drop-down
list.
5. Specify a name for your connection (any name for easier identification) in
the
Name
field.
18
