manualshive.com logo in svg

D-Link DSL-2640BT, User Manual, Page: 8 / 88

Share
Download
D-Link DSL-2640BT User Manual Download Page 8

Product Overview   

D-Link DSL-2640BT User Manual

 

4

LED Indicators 

Front Panel 

 

Side Panel 

 

 

LED 

Color 

Status 

Description 

Off 

Power not supplied. 

Green 

On Power 

supplied. 

Power 

Red 

On 

Not bootable or device is malfunction. 

Off 

No LAN link. 

Blink 

Data is being transmitted through the LAN interface. 

LAN 1/2/3/4 

Green 

On 

LAN link is established and active. 

Off 

WLAN is disabled. 

Blink 

WLAN traffic is flowing. 

WLAN Green 

On 

WLAN link is established. 

Off 

DSL line is disconnected. 

Blink 

DSL line is training. 

DSL Green 

On 

DSL line is connected. 

Off 

The device is under the Bridge mode, DSL connection is not present, or the power is off. 

Blink 

DSL traffic is flowing. 

Green 

On 

IP is connected. 

Internet 

Red 

On 

The device is attempted to become IP connected, but failed. 

Off 

Device is ready for new WPS to setup. 

Blink 

WPS is successfully triggered. 

WPS button (on the 
side panel) 

Blue 

On 

Press the button to enable WPS service. When connection is successfully established between the router 
and the client, the LED remains in solid light for 5s.   

 

Summary of Contents for DSL-2640BT

























































































Reviews:

No comments