D-Link DSL-200, Quick Installation Manual

Page: 12 / 32

12
5) In the Select Driver Type window, choose the driver that best suits your ADSL
connection, and then click Next .
6)
In the Communication Settings window you must provide the PVC settings,
Encapsulation method and Modulation method for configuring the Modem.
Type in the VPI and VCI values in their respective fields.
7) In the same window, select the appropriate
Encapsulation method from the
drop-down menu. You will select the encapsulation setting that is appropriate for
the driver you are installing.
For RFC 2516 PPPoE, select RFC 2516 PPPoE Encapsulation. If you using
RFC 2364 PPPoATM and your service provider have not specified an
encapsulation setting, use RFC 2364 PPPoATM NULL Encapsulation.
If you are using the LAN driver, select the appropriate RFC 1483 encapsulation
setting. If your service provider has not specified an encapsulation setting, use
RFC 1483 IPoATM Bridged LLC Encapsulation.
8) Again in the same window, select the proper Modulation settings using the drop-
down menu. Your service provider will give you the appropriate Modulation
settings. Choose T1.413, Multimode, G.Lite or G.DMT. If your service provider
has not specified a modulation setting, use Multimode. Click
Next to continue.
At this point you must choose the Encapsulation method and
Modulation technique used for your ADSL connection. Be sure to
have the correct information available.
Click Next .
Select WAN Driver
or LAN Driver .