20
D-Link DPR-1260 User Manual
Section 3 - Configuration
Network Settings
Select
DHCP
to get the IP settings
automatically from a DHCP server on your
network. Select
Static
to assign an IP
address to the print server.
Type the desired IP address of the print
server.
Enter the subnet mask of your network.
Enter the default gateway. This is the address
of your router or gateway.
Network Settings:
IP Address:
Subnet Mask:
Default Gateway:
These are the settings of the LAN (Local Area Network) interface for the device. These settings may be referred to as
“private settings”. You may change the LAN IP address if needed. The LAN IP address is private to your internal network
and cannot be seen on the Internet. The default IP address is 192.168.0.10 with a subnet mask of 255.255.255.0.
