5
Rear Panel Connectors
Network Cable Connector
The Print Server’s rear panel feature an RJ-45 connector for connection to 10Base-T
Ethernet cabling or 100Base-TX Fast Ethernet cabling (which should be Category 5
twisted-pair cable). The port supports the NWay protocol, allowing the Print Server to
automatically detect or negotiate the transmission speed of the network.
Reset Button
Press and release this button to reset the MFP Server; or press and hold this button for
three seconds until the USB1, USB2, and LPT LEDs on the front panel light up and then
release the button, The MFP Server will then resume the default factory settings.
DC Power Connector
The DC power input connector is located on the Print Server’s rear panel and is labeled
DC 5V.
