DPN-1021G
Quick Installation Guide
CONFIGURING GATEWAY
Connecting to Web-based Interface
Start a web browser. In the address bar of the web browser, enter the IP
address of the gateway (by default,
192.168.0.1
). Press the
Enter
key.
!
If the error “
The page cannot be displayed
” (or “
Unable to display the
page
”/“
Could not connect to remote server
”) occurs upon connecting to
the web-based interface of the gateway, make sure that you have
properly connected the gateway to your computer.
If the device has not been configured previously or the default settings have
been restored, after access to the web-based interface the Initial Configuration
page opens (see the
section, page 10).
7
