36
D-Link DPN-101G User Manual
Section 3 - Configuration
Choose
Admin
>
System Log
, the page shown in the following figure appears. This page is used to display the system event log table. By checking
Error or Notice (or both) will set the log flag.
The following table describes the parameters of this page:
System Log
Field
Description
Log/Display Level
There have different level of log to be record
and display.
Mode
User can select Local or Remote. If select
Remote, user should also configure the IP
address and UDP port of the Log server.
Save Log to File
Save the log file to local hard disk.
Clear Log
Clean up the current Log on the device.
