D-Link DPH-70L, User Manual

Page: 11 / 35

DPH-70L User’s Guide
11
4 Getting Started
After installation, DPH-70L is ready for configuration. You need to enter Internet Service Provider
(ISP) and VoIP Calling Card information to make and receive Internet phone calls. However, it
can make normal PSTN phone calls without any configuration. Refer to
Appendix A to know how
to enter alphanumeric and special characters required for user name and password.
Warning:
DPH-70L identifies end of each parameter by ‘ENTER’ key. Please terminate each
parameter entry by pressing ‘ENTER’ key. For example, to enter the password as ‘123’ you
should press ‘123 ENTER’.
4.1.1 ISP Information
Following Internet Service Provider (ISP) account information is required for dial-up Internet
connection. Refer to your Internet Service Provider’s card for this information.
¾ Internet Access Telephone Number
¾ User Name
¾
Password
To enter these parameters, follow the steps below. DPH-70L configuration menu on LCD display
guides you through the configuration process.
1. Press ‘MENU’ key to enter the configuration menu.
2. Enter the configuration password. The default password is ‘12345’.
3. Enter
‘1’ to configure the ISP parameters. It displays ISP menu.
4. Enter ‘1’ to edit ISP Phone number.
5. It displays the current value of Internet access Phone number. Edit the Internet access
phone number and press ‘ENTER’ button.
6. After this it displays the ISP menu. Press ‘2’ for ISP User Name and ‘3’ for ISP Password
to modify their values as in step 5.
7. Press ‘CANCEL’ key to come out of ISP configuration to main menu and enter ‘7’ to save
the parameters.
4.1.2 VoIP Calling Card Information
Following VoIP (Internet Telephone) calling card information is required for Internet phone
connection. The VoIP service provider will provide these parameters. Refer your calling card for
these parameters. After entering the calling card parameters, your Internet phone number will be
same as user ID.
¾ VoIP User Name
¾ VoIP Password or PIN
¾ VoIP Server IP
To enter these parameters, follow the steps below. DPH-70L configuration menu on LCD display guides
you through the configuration process.
1. Press ‘MENU’ key to enter the configuration menu.
2. Enter the configuration password. The default password is ‘12345’.
3. Enter
‘2’ to configure the VoIP parameters. It displays VoIP menu.
4. Enter ‘1’ to edit VoIP User Name.
5. It displays the current value of VoIP User Name. Edit the VoIP User Name and press
‘ENTER’ button.
6. After this it displays the VoIP menu. Press ‘2’ for VoIP Password and ‘3’ for VoIP Server
Address to modify their values as in step 5.