D-Link DNS-726-4 - Network Video Recorder Standalone... Product Manual Download Page 27

Page: 27 / 93

D-Lnk DNS-722-4/DNS-726-4 User Manual

Secton - Configuraton

The main categories for configuration are located on the menu tabs at the top of the page. These categories include:



LIVE.VIDEO

- Shows the live video of network cameras and controls PTZ functions.



PLAYBACK

- Displays recorded video and exports snapshots or video.



SETUP

- Contains the DNS-722-4/DNS-726-4 setup wizard, as well as the LAN configuration settings,

camera search, camera settings, recording schedule, event settings, time and system settings, and device
settings.



MAINTENANCE

- Contains the Administrator account configuration options, Hard Disk management

options and RAID configuration options. System configuration, backup, and restore functions are also
available.



STATUS.

- Contains system, NVR, and event logs.

These pages and their configuration options will be discussed in detail in the following pages of this manual.

Web UI

Summary of Contents for DNS-726-4 - Network Video Recorder Standalone...






























































































Search results

Summary of Contents for DNS-726-4 - Network Video Recorder Standalone...

Reviews:

Related manuals for DNS-726-4 - Network Video Recorder Standalone...

Brands by name

Popular brands

D-Link DNS-726-4 - Network Video Recorder Standalone..., Product Manual

Search results

Summary of Contents for DNS-726-4 - Network Video Recorder Standalone...

Reviews:

Related manuals for DNS-726-4 - Network Video Recorder Standalone...

Brands by name

Popular brands