Login Web-based Management
In order to login and configure the switch via Web-based GUI, the PC must have an IP address in the same
subnet as the switch. For example, if the switch has an IP address of 10.90.90.90, the PC should have an
IP-address of 10.x.y.z (where x/y is a number between 0 ~ 254 and z is a number between 1 ~ 254), and a
subnet mask of 255.0.0.0. Open the web browser and enter 10.90.90.90 (the factory-default IP address) in
the address bar. Then press <Enter>.
NOTE:
the switch's factory default IP address is 10.90.90.90 with a subnet mask of 255.0.0.0.
Enter the default User name / Password with
admin
/
admin,
and press Login to enter the main
configuration window.
Smart Wizard
After a successful login, the Smart Wizard will guide you through essential settings of the D-Link
DMS-1100-10TP / DMS-1100-10TS parameters. If you do not plan to change anything, click Exit to leave the
Wizard and enter the Web-Interface.
Configuration
For more detailed information on how to set up and configure the DMS-1100-10TP / DMS-1100-10TS, please
refer to the User Manual.
7
Summary of Contents for DMS-1100-10TP
Page 16: ...16 ...
