26
sacrificed.
An MP3 file is not displayed on the Flash Memory display or in
the SmartMedia card display list box even if it is downloaded.
If you have had no previous problems communicating with the player, the
DMP-210/220 Manager software may not recognize the player. In this case,
initialize the Flash Memory or SmartMedia card of the player by clicking on
the Initialize button.
You may also try closing the manager software, unplugging and then
reconnecting the USB cable, then opening the manager software again..
The PC does not recognize the DMP-210/220.
If the DMP-210/220 Manager does not recognize the player, refer to the
following:
§
First, check if the USB cable is connected properly, or if the player is
turned on.
§
Check that the DMP-210/220 USB driver is installed. If it is not
installed, install the DMP-210/220 USB driver.
§
If the player is connected to the USB hub, disconnect the player and
connect to an available USB port on your PC.
§
If you have upgraded your PC from Windows 95 to Windows 98, the
USB port of your PC may have no capability to control devices other
than USB keyboard and mouse. In this case, you can upgrade the
BIOS of your PC. Contact the manufacturer of your PC to get the
information about the BIOS. However, the player may not work with
your PC due to your PC hardware limitation.
Additional information and troubleshooting tips can be found at:
http://support.dlink.com
