D-LINK ISDN TA DMI-
53
10.7 Making a Local 3 Party Conference
•
Same operating sequence with network 3 party conference.
Case No
Representation
0
When A and D is in talk mode
1. A talks to D
2. A press flash key then press 1
3. D hears holding tone
4. A hears TA1’s dial tone
5. A
calls
C
6. C
off-hook
7. A and C is in talk mode
8. A press flash then press 0
A, D, C are in 3 party conference
10.8 Making a Local Call Forwarding
Case No
Representation
0
1. Set AT$CF1 for local call forwarding
2. Set AT*CFG1 to enable global call forwarding
1.
Set AT*CFA1 to enable call forwarding for A
2.
Set AT*CFB1 to enable call forwarding for B
3.
Set AT*CFG=xxxxxx for the global call forwarding number
(If TA received an incoming call but without called party
number then this call is named global call)
4.
Set AT*CFA=xxxxxx for A call forwarding number only
5.
Set AT*CFB=xxxxxx for B call forwarding number only
1
When TA received an incoming global call
1. TA will inform network to forward this incoming call to the
number specified by AT*CFG=xxxxxx
(For example, if set AT*CFG= to D then D will be ringed)
Note:
If there is no B-ch available, then TA will reject the local
call forwarding. Calling party will hear BT.
2
When TA received an incoming call directly for A
1. TA will inform network to forward this incoming call to the
number specified by AT*CFA=xxxxxx
(For example, if set AT*CFA= to D then D will be ringed)
Note:
If there is no B-ch available, then TA will reject the local
call forwarding. Calling party will hear BT.
3
When TA received an incoming call directly for B
1. TA will inform network to forward this incoming call to the
number specified by AT*CFA=xxxxxx
(For example, if set AT*CFA= to D then D will be ringed)
Note:
If there is no B-ch available, then TA will reject the local
call forwarding. Calling party will hear BT.
Summary of Contents for DMI-128ESU+
Page 59: ...D LINK ISDN TA DMI 128ESU 59 ...