D-Link DMC-920R, Quick Installation Manual, Page: 3 / 12

C
ONNECTING TO
P
OWER
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage
of 5Vdc/1Amp to the DC-Jack on the converter, and then attach the
plug into a standard AC outlet with a voltage range from 100 to
260 Vac.
S
LIDING
S
WITCH
There is a sliding switch for duplex mode setting for fiber port. Refer to
the table below for more details.
Switch 1 On Fiber Half Duplex
Off Fiber Full Duplex
Switch 2 On TX Forced Mode
Off TX Auto-Negotiation
Switch 3 On TX 10M
Off TX 100M
Switch 4 On TX Half Duplex
Off TX Full Duplex
Switch 5 On LLR Enable (RFD Disable)
Off LLR Disable (RFD Enable)
Switch 6 On LLCF Enable
Off LLCF Disable
3