D-Link DMC-810SC, Quick Installation Manual

Page: 3 / 14

S
ETUP
T
HE
DMC-810SC S
INGLE
F
IBER
M
EDIA
C
ONVERTER
As with any electric device, you should place the equipment where it
will not be subjected to extreme temperatures, humidity, or
electromagnetic interference. Specifically, the site you select should
meet the following requirements:
A. The ambient temperature should be between 32 and 104 degrees
Fahrenheit (0 to 40 degrees Celsius).
B. The relative humidity should be less than 90 percent,
non-condensing.
C. Surrounding electrical devices should not exceed the
electromagnetic field (RFC) standards for IEC 801-3, Level 2 (3V/M)
field strength.
D. Make sure that the equipment receives adequate ventilation. Do
not block the ventilation holes on each side of the media converter or
the fan exhaust port on the side or rear of the equipment.
E. The power outlet should be within 1.8 meters of the switch.
C
ONNECTING TO
P
OWER
1. This Converter is a plug-and-play device.
2. Connect the supplied AC to DC power adaptor with a power voltage
of 5Vdc/1Amp to the DC-Jack on the converter, and then attach the
plug into a standard AC outlet with a voltage range from 100 to
240 Vac.
3