D-Link DKVM-IP16, User Manual

Page: 4 / 28

Hotkey command introduction
In addition to the front panel buttons, the KVM switch port can
also be used via a simple keyboard combination. Simpl y press
the HOM E / Cap / Scrol l / Num keys twice within 2 s to send a
command to the KVM and you will hear ” Bee p ". After confir m
that you can use the hotkey command, this product has multiple
modes to choose. HOM E + HOM E is the default mode, when
you do not want to use this mode, you can choose another
command mode. The following is the way to set different hotkey
mode.
default mode
+ Caps Ente r hot-key Caps mode
+ Scrol l enter hot-key Scrol l mode
+Num Ente r hot-key Num mode
Default mode command
Switc h to the corresponding port.
Switc h to Nex t
Switc h to Pre.
Off/ on the buzzer
Auto-scanning, press any key to
stop auto-scanning
or
or