DIS-700G-28XS Industrial Layer 2+ Gigabit Managed Switch with 10G SFP+ slots Quick Installation Guide
7
Connect & Log in to the DIS-700G-28XS
1. Connect to the console port on the DIS-700G-28XS.
2. Navigate to the switch’s default IP address:
10.90.90.90
3. Log in using the default user name and password.
User name:
admin
Password:
admin
CLI Initialization & Configuration (Optional)
1. Connect to the Console port on the DIS-700G-28XS.
2. Enter the command:
telnet 10.90.90.90
3. Log in using the default user name and password.
User name:
admin
Password:
admin
4. Change the IP address using the commands listed below:
CLI Command:
SYSTEM RESET
In the unlikely event that the switch is not responding or is experiencing problems, press the reset button to
reboot the system.
enable
configure
interface vlan 1
ip-address xxx.xxx.xxx.xxx netmask xxx.xxx.xxx.xxx
exit