DIS-200G Series Layer 2 Gigabit Industrial Smart Managed Switch Hardware Installation Guide
28
5.
Web-based Switch Configuration
Introduction
Most software functions of the switch can be managed, configured, and monitored via the embedded HTML Web UI.
Management can be done on the switch from remote stations anywhere on the network through a standard web
browser. The web browser acts as a universal access tool and can communicate directly with the switch using the
HTTP or HTTPS (SSL) protocol.
The following web browsers are supported:
•
Internet Explorer
•
Firefox
•
Google Chrome
•
Safari
Logging into the Web UI
To access the Web UI, open a standard web browser, enter the switch’s default IP address
10.90.90.90
into the
address bar of the browser, and press the ENTER key.
After pressing the ENTER key, the following authentication window should appear, as shown below.
Figure 5-1 Web UI Login Window
When connecting to the Web UI of the switch for the first time, enter the default user name and password of
admin
and press Enter.
Smart Wizard
After a successfully connecting to the Web User Interface for the first time, the Smart Wizard embedded Web utility
will be launched. This wizard will guide the user through basic configuration steps that is essential for first time
connection to the switch.
Summary of Contents for DIS-200G-12S
Page 1: ......
