manualshive.com logo in svg

D-Link DIR-X1530, User Manual

The D-Link DIR-X1530 is a high-performance router that offers seamless internet connectivity. Setting it up is a breeze with the included Quick Installation Manual, which you can download for free from our website. Get easy-to-follow instructions and optimize your network experience with this user-friendly manual at manualshive.com.

Share
Download
background image

DIR-X1530

 AX1500 Wi-Fi 6 Gigabit Router

User Manual

Contents

Chapter 1.  Introduction.........................................5

Contents and Audience.......................................................5
Conventions.................................................................5
Document Structure..........................................................5

Chapter 2.  Overview.............................................6

General Information.........................................................6
Specifications..............................................................8
Product Appearance.........................................................13

Upper Panel..............................................................13
Back Panel...............................................................15

Delivery Package...........................................................17

Chapter 3.  Installation and Connection.........................18

Before You Begin...........................................................18
Connecting to PC...........................................................19

PC with Ethernet Adapter.................................................19
Obtaining IP Address Automatically (OS Windows 7)........................20
Obtaining IP Address Automatically (OS Windows 10).......................25
PC with Wi-Fi Adapter....................................................29
Obtaining

 

IP

 

Address

 

Automatically

 and

 

Connecting

 

to Wireless Network (OS Windows 7).......................................30
Obtaining

 

IP

 

Address

 

Automatically

 and

 

Connecting

 

to Wireless Network (OS Windows 10)......................................33

Connecting to Web-based Interface..........................................36
Web-based Interface Structure..............................................38

Summary Page.............................................................38
Home Page................................................................40
Menu Sections............................................................41
Notifications............................................................42

Chapter 4.  Configuring via Web-based Interface.................43

Initial Configuration Wizard...............................................43

Selecting Operation Mode.................................................45

Router.................................................................45
Access Point or Repeater...............................................46

Changing LAN IPv4 Address................................................48
Wi-Fi Client.............................................................49
Configuring WAN Connection...............................................51

Static IPv4 Connection.................................................52
Static IPv6 Connection.................................................53
PPPoE,

 

IPv6

 

PPPoE,

 

PPPoE

 

Dual

 

Stack,

 

PPPoE + Dynamic IP (PPPoE Dual Access) Connections.....................54
PPPoE + Static IP (PPPoE Dual Access) Connection.......................55
PPTP + Dynamic IP or L2TP + Dynamic IP Connection......................56
PPTP + Static IP or L2TP + Static IP Connection........................57

Configuring Wireless Network.............................................58
Configuring LAN Ports for IPTV/VoIP......................................60
Changing Web-based Interface Password....................................62

Connection of Multimedia Devices...........................................64

Page 

2

 of 254

Summary of Contents for DIR-X1530































































































































































































































































Reviews:

No comments

Related manuals for DIR-X1530

D-Link DSL-2750U Quick Start Manual preview
DSL-2750U
Brand: D-Link Pages: 2
MikroTik RouterBOARD Groove Quick Setup Manual And Warranty Information preview
RouterBOARD Groove
Brand: MikroTik Pages: 4
ADC HiGain HLU-231 List 8F Quick Installation preview
HiGain HLU-231 List 8F
Brand: ADC Pages: 7
Sangamo CHOICE PR1 User Instructions preview
CHOICE PR1
Brand: Sangamo Pages: 2
Ubiquiti PBE-5AC-300-ISO Quick Start Manual preview
PBE-5AC-300-ISO
Brand: Ubiquiti Pages: 28
TRENDnet TEG-S51SFP Quick Installation Manual preview
TEG-S51SFP
Brand: TRENDnet Pages: 10
AC&NC JetStor NAS 724UX User Manual preview
JetStor NAS 724UX
Brand: AC&NC Pages: 117
IndigoVision Compact NVR-AS 4000 User Manual preview
Compact NVR-AS 4000
Brand: IndigoVision Pages: 38
Patton DiamondLink 3201 Quick Start Manual preview
DiamondLink 3201
Brand: Patton Pages: 12
Fastech Ezi-SERVOII EtherCAT TO User Manual preview
Ezi-SERVOII EtherCAT TO
Brand: Fastech Pages: 108
Global411 MS41p1 Quick Installation Manual preview
MS41p1
Brand: Global411 Pages: 15
Hama 00176547 Operating Instruction preview
00176547
Brand: Hama Pages: 25
Infoblox Infoblox-250 Installation Manual preview
Infoblox-250
Brand: Infoblox Pages: 16
US Robotics uShare USR8710 User Manual preview
uShare USR8710
Brand: US Robotics Pages: 180
M-system M5XSBS Instruction Manual preview
M5XSBS
Brand: M-system Pages: 4
Kramer VS-162AVM User Manual preview
VS-162AVM
Brand: Kramer Pages: 56
Kasda KE318EU User Manual preview
KE318EU
Brand: Kasda Pages: 39
H3C AR 46-80 Installation Manual preview
AR 46-80
Brand: H3C Pages: 103

Brands by name

Popular brands

Load more brands