68
D-Link DIR-869 User Manual
Section 4 - Coniguration
Port Forwarding
Port forwarding allows you to specify a port or range of ports to open for speciic devices
on the network. This might be necessary for certain applications to connect through the
router. In the Features menu on the bar on the top of the page, click
Port Forwarding
.
If you wish to remove a rule, click on its trash can icon in the Delete column. If you wish
to edit a rule, click on its pencil icon in the Edit column. If you wish to create a new rule,
click the
Add Rules
button
.
Click
Save
when you are done. If you edit or create a rule, the
following options will appear:
Name:
Enter a name for the rule.
Local IP:
Enter the IP address of the computer on your local network that you
want to allow the incoming service to. Alternatively, select the device
from the drop-down menu.
TCP Port:
Enter the TCP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
UDP Port:
Enter the UDP ports that you want to open. You can enter a single
port or a range of ports. Separate ports with a comma (for example:
24,1009,3000-4000).
Schedule:
Use the drop-down menu to select the time schedule that the rule
will be enabled on. The schedule may be set to
Always Enable
, or
you can create your own schedules in the
Schedules
section. Refer
to page 76 for more information.
Click
Apply
when you are done.
