DIR-830M
Quick Installation Guide
CONFIGURING ROUTER
Connecting to Web-based Interface
Start a web browser. In the address bar of the web browser, enter the domain
name of the router (by default,
dlinkrouter.local
) with a dot at the end
and press the
Enter
key. Also you can enter the IP address of the device (by
default,
192.168.0.1
).
!
If the error “
The page cannot be displayed
” (or “
Unable to display the
page
”/“
Could not connect to remote server
”) occurs upon connecting to
the web-based interface of the router, make sure that you have properly
connected the router to your computer.
If the device has not been configured previously or the default settings have
been restored, after access to the web-based interface the Initial Configuration
Wizard opens (see the
section, page 21).
17
