D-Link DIR-822K, User Manual

Page: 60 / 92

60
QOS
You can use this Feature to improve all round network traffic and prioritize network packets to improve online gaming / FTP or WEB services.
Enable QoS: Enable or Disable the Rule.
Automatic Uplink Speed : Enable or Disable .
Automatic Downlink Speed : Enable or Disable.
Name: : Give the Rule a name.
QoS Type: : Choose a type
(IPv4,IPv6,MAC,PHYPORT,DSCP)
Protocol : Choose a protocol (Both, TCP,UDP)
Local IP Address : IP address of the Router.
Local Port : Enter the Local port you will be using.
Remote IP Address : Enter the IP you will be using to
send and receive traffic.
Remote Port : Enter the Remote Port you will be
using.
Mode : Guaranteed minimum or Restricted
maximum bandwidth.
Uplink Bandwidth : Set a Uplink bandwidth limit.
Downlink Bandwidth : Set a downlink bandwidth
limit.
Priority : Set a priority between 1 -7 (higher the
number = higher the priority )
Remark DSCP : you can re-mark differentiated
service codes to prioritize IP packets.
Comment : Enter a name or tag.