D-Link DIR-665 User Manual Download

Page: 5 / 103

D-Lnk DIR-665 User Manual

Secton - Product Overvew

• D-Link DIR-665 Xtreme

450 Dual

Band Gigabit Router

• 3 Detachable Antennas
• Power Adapter
• CAT5 Ethernet Cable
• CD-ROM with Installation Wizard, User Manual, and

Special Offers

System Requirements

• Ethernet-based Cable or DSL Modem
• Computers with Windows

, Macintosh

, or Linux-based operating systems with an installed Ethernet

adapter

• Internet Explorer Version 6.0, Mozilla 1.7.12 (5.0), or Firefox 1.5 and above (for configuration)
• Installation Wizard requires Windows

XP with Service Pack 2

Product Overview

Package Contents

Note:.

Using a power supply with a different voltage rating than the one included

with the DIR-665 will cause damage and void the warranty for this product.

Summary of Contents for DIR-665








































































































Search results

Summary of Contents for DIR-665

Reviews:

Related manuals for DIR-665

Brands by name

Popular brands

D-Link DIR-665, User Manual

Search results

Summary of Contents for DIR-665

Reviews:

Related manuals for DIR-665

Brands by name

Popular brands