manualshive.com logo in svg

D-Link DIR-628 - RangeBooster N Dual Band Router Wireless, Product Manual, Page: 75 / 112

Share
Download
D-Link DIR-628 - RangeBooster N Dual Band Router Wireless Product Manual Download Page 75

D-Link DIR-68 User Manual

Section  - Configuration

Dir:

Priority:

Time Out:

The direction of initiation of the conversation: 

.

Out

 - Initiated from LAN to WAN.

.

In

 - Initiated from WAN to LAN.

The  preference  given  to  outbound  packets  of  this  conversation  by  the  QoS  Engine  logic.  Smaller  numbers  represent  higher 
priority. 

The number of seconds of idle time until the router considers the session terminated. The initial value of Time Out depends on the 
type and state of the connection.

 

300.seconds

 - UDP connections.

240.seconds

 - Reset or closed TCP connections. The connection does not close instantly so that lingering packets can 

pass or the connection can be re-established.

 

7800.seconds

 - Established or closing TCP connections.

Summary of Contents for DIR-628 - RangeBooster N Dual Band Router Wireless

















































































































Reviews:

No comments