D-Link DIR-602, User Manual, Page: 34 / 75

Section 3 – Configuration
Network Settings
This section will allow you to change the local network settings of the router and to configure the DHCP settings.
IP Address: Enter the IP address of the router. The default
IP address is 192.168.0.1.
Subnet Mask: Enter the Subnet Mask of the router.
DHCP SERVER SETTINGS:
Enable DHCP
Server:
Select Enabled to enable the DHCP server on
your router. Select Disabled to disable this
function.
DHCP Start IP
Address :
Enter the starting and ending IP addresses for
the DHCP server’s IP assignment.
Maximum DHCP
Users:
Set the maximum number of DHCP users.
DHCP Lease
Time :
The length of time for the IP address lease.
Enter the lease time in minutes.
ADD DHCP RESERVATION:
Enable: Check the box to enable DHCP reservation.
IP Address: Enter the IP address you want to assign to the
computer or device. The IP address must be
within the DHCP IP address range.
MAC Address: Enter the MAC address of the computer or
device, then click the
Copy Your PC’s MAC
Address button to automatically enter the
MAC address of your current PC’s network
interface.
DHCP
Reservations List :
This list shows the clients using DHCP
reservation.
DHCP Clients
List :
The list shows the clients that have
dynamically assigned IP addresses.
D-Link DIR-602 User Manual
33