DIR-600L
8
E
N
G
LI
S
H
TROUBLESHOOTING
SET-UP AND CONFIGURATION PROBLEMS
1. HOW DO I CONFIGURE MY DIR-600L ROUTER, OR CHECK MY WIRELESS NETWORK
NAME (SSID) AND WIRELESS ENCRYPTION KEY?
- connect your pc to the router using an ethernet cable.
- open a web browser and enter the address http:// dlinkrouter or http://192.168.0.1
- the default username is ‘admin’. the default password is ‘’ (leave the field blank).
- If you have changed the password and can not remember it, you will need to reset the router to
set the password back to ‘’ (leave the field blank).
2. HOW DO I RESET MY DIR-600L ROUTER TO FACTORY DEFAULT SETTINGS?
- ensure the router is powered on.
- press and hold the reset button on the rear of the device for 20 seconds.
note: Resetting the router to factory default will erase the current configuration settings. to re-
configure your settings, log into the router as outlined in question 1, then run the setup Wizard.
3. HOW DO I ADD A NEW WIRELESS CLIENT OR PC IF I HAVE FORGOTTEN MY
WIRELESS NETWORK NAME (SSID) OR WIRELESS ENCRYPTION KEY?
- every pc that needs to connect to the router wirelessly, you will need to ensure you use the
correct Wireless network name (ssId) and encryption key.
- use the web based user interface (as described in question 1 above) to check or choose your
wireless settings.
- make sure you write down these settings so that you can enter them into each wirelessly
connected pc. You will find a dedicated area on the back of this document, this important
information for future use.
4. WHY CAN I NOT GET AN INTERNET CONNECTION?
- For adsl users please contact your Isp to make sure the service has been enabled/connected
by your Isp and that your Isp username and password is correct.
Summary of Contents for DIR-600L
Page 13: ...DIR 600L 11 NOTES ...
Page 38: ...DIR 600L 36 中 文 包裝內容物 內容物 WIRELESS N 150 路由器 DIR 600L 電源供應器 變壓器 若有內容物遺漏 請儘快聯絡您購買的經銷商 ...
Page 54: ...NOTES ...
Page 55: ...NOTES ...
