DiR-516
4
EN
G
LI
SH
PRODUCT SETUP
RouteR MoDe
access point mode does not assign Ip addresses dynamically with dHcp. If you do not have an
existing network and wish to put the dIR-516 in Router mode, you must first connect to the dIR-516
wirelessly and assign a static Ip address. this can be done using your computer's operating system.
once you have a static Ip address assigned, open a web browser and enter
192.168.0.50
into
the address bar. leave the username as
admin
and leave the password blank. navigate to
Wireless Settings
and deselect
Enable Access Point Mode
. the dIR-516 will reboot. now, enter
192.168.0.1
into the browser's address bar to access the web-based configuration in Router mode.
Step 3:
to configure the dIR-516, open a web browser on your computer
and enter
192.168.0.50
into the address bar. leave the username as
admin
and leave the password blank.
Step 4:
use your computer's wireless adapter or smartphone to establish
a wireless connection to the dIR-516. the default wireless network
name (ssId) is
D-Link_DIR-516
and leave the password/key blank.
WELCOME TO THE D-LINK SETUP WIZARD
Smartphone
PC
Summary of Contents for DIR-516
Page 38: ...DIR 516 38 NOTES ...
Page 39: ...DIR 516 39 NOTES ...
