D-Link DIR-510L, Manual

Page: 15 / 45

Step 5: Click Save to save the seangs.
3. How do I reset my DIR-510L to factory default settings?
Example:
a. If you forget your router’s password, you can perform a reset to return all settings to the
factory default.
b. If you can’t open the login web page or log in to the device.
c. If you change your network environment.
d. If you want to assign device to another mydlink account.
e. If you encounter a problem while registering the device to the mydlink service.
Step 1: While the router is on, use the end of a paper clip to press the buTon inside the
pinhole on the side of the router, as highlighted by the red square below.
Step 2: Hold the buTon down for 10 seconds and then release.
Step 3: The unit will reboot automaRcally. Once the WLAN light stops blinking, the unit has
been reset. Reseang the router does
not reset the firmware to an earlier version, it only
changes all seangs back to factory defaults.
Note: 1. The factory default username is Admin , and there is no password.
2. You will need to register the router with mydlink again ader a factory reset.