D-Lnk DIR-330 User Manual
Secton 3 - Configuraton
In most cases, select
Dynamic. Select Static if your ISP assigned
you the IP address, subnet mask, gateway, and DNS server
addresses.
Enter the IP address (Static PPTP only).
Enter the Primary and Secondary DNS Server Addresses (Static
PPTP only).
Enter the Gateway IP Address provided by your ISP.
The DNS server information will be supplied by your ISP (Internet
Service Provider.)
Enter the Server IP provided by your ISP (optional).
Enter your PPTP account (username).
Enter your PPTP password and then retype the password in the
next box.
Enter a maximum idle time during which the Internet connection is maintained during inactivity. To disable this feature, enable
Always-on (
Connect Mode
option below).
You may need to change the MTU (Maximum Transmission Unit) for optimal performance with your specific ISP. 1450 is the
default MTU.
Select either
Always-on, Manual, or Connect On-Demand.
Address Mode:
IP Address:
Subnet Mask:
Gateway:
DNS:
Server IP/Name:
Internet Setup
PPTP
Choose PPTP (Point-to-Point-Tunneling Protocol ) if your ISP uses a PPTP connection. Your ISP will provide you with
a username and password. This option is typically used for DSL services.
PPTP Account:
PPTP Password:
Maximum Idle
Time:
MTU:
Connect Mode:
Summary of Contents for DIR-330 - Wireless G VPN Router
Page 1: ......
Page 66: ...61 D Link DIR 330 User Manual Section 3 Configuration Help ...