D-Link Technical
Support – How to setup Port Forwarding on the DIR-300.
Page
4
of
4
5. This guide will advise on what is required for an FTP Server (Port 21) and the popular
Peer to Peer application Utorrent which has been configured to run on Port 6881.
6. To allow FTP click on the checkbox and under Application Name select FTP from the
drop down menu and click on the corresponding "<<" button in front of the FTP selection.
Now under the IP Address type in 192.168.0.100 (remember the IP Address assigned
under DHCP Reservation?)
7. Now click on the Save Settings button.
8. Now repeat Step 6, however this time selecting the 2nd entry, click the checkbox, under
Name type in Utorrent, and under the Public Port type in 6881 to both entries and under IP
Address type in 192.168.0.100 and under the Private Port type in 6881 as well. Under the
Traffic Type select Any from the drop down menu.
9. Now again click on the Save Settings button.
10. Both entries should look similar to the below:
11. Port Forwarding for FTP and Utorrent is now configured for this computer in this
example.
IMPORTANT:
There are many ways in which to obtain the Ports needed for your Application,
including referring to your application documentation to searching online.
Please remember to ensure your DIR-300 has the most current firmware version
applied. To apply this firmware please refer to the Technical Support Knowledge
Base.
