139
D-Link DIR-2640 User Manual
Section 7 - Connect a Wireless Client to your Router
Step 2
- Within 2 minutes, press the WPS button on your wireless device (or launch the software utility and start the WPS
process).
Step 3
- Allow up to 1 minute for your connection to be configured. Once the Internet light stops blinking, you will be
connected and your wireless connection will WPA2.
Connect a Wireless Client to your Router
WPS Button
The easiest way to connect your wireless devices to the router is with WPS (Wi-Fi Protected Setup). Most wireless devices
such as wireless adapters, media players, Blu-ray DVD players, wireless printers and cameras will have a WPS button (or a
software utility with WPS) that you can press to connect to the router. Please refer to your user manual for the wireless
device you want to connect to make sure you understand how to enable WPS. Once you know, follow the steps below:
Step 1
- Press the WPS button on the router for about 1 second. The wireless LEDs will start to blink.
WPS Button