D-Link DIR-2055 User Manual Download Page 101

Page: 101 / 161

D-Link DIR-2055 User Manual

Section 3 - Configuration

Statistics

In the Management menu on the bar at the top of the page, click

Statistics

. On the Statistics page you can view the amount of

packets that pass through the router on the Internet, LAN, Wi-Fi 2.4 GHz and Wi-Fi 5GHz networks.

To view the Extender statistics, click the

Extender

link. Refer to

Statistics - Extender

on page

You can view the

Internet

LAN

Wi-Fi 2.4 GHz

, or

Wi-Fi 5 GHz

by clicking on the respective

tabs at the top. The graph will update in real time. To clear the information on the graph,

click

Clear

near the top of the page.

The traffic counter will reset if the device is rebooted.

Summary of Contents for DIR-2055


































































































































































Search results

Summary of Contents for DIR-2055

Reviews:

Related manuals for DIR-2055

Brands by name

Popular brands

D-Link DIR-2055, User Manual

Search results

Summary of Contents for DIR-2055

Reviews:

Related manuals for DIR-2055

Brands by name

Popular brands