30
D-Lnk DIR-130 User Manual
Secton 3 - Configuraton
Keep Alive / DPD:
DH Group:
IKE Proposal List:
IKE Lifetime:
PFS Enable:
PFS DH Group:
IPSec Proposal List:
IPSec Lifetime:
Select
None
,
Keep Alive
, or
DPD
(Dead Peer
Connection).
•
None
- Select this option to disable Keep Alive.
•
Keep Alive
- Select this option to send random ping
requests from this endpoint to the remote endpoint
keeping the tunnel established during long idle
periods of inactivity.
•
DPD
- Select this option to delete the VPN tunnel if
there is no traffic detected. The VPN will re-establish
once traffic is again sent through the tunnel.
Select a DH Group from the drop-down menu. As the DH
Group number increases, the higher the level of encryption
implemented for Phase 1.
Select the Cipher and Hash from the drop-down menus.
The proposal listing is evaluated in order with #1 being the
first proposal to attempt in IKE negotiation.
Enter the number of seconds for the IKE Lifetime. The period of time to pass before establishing a new IKE security
association (SA) with the remote endpoint. The default value is 28800.
Check to enable or uncheck to disable. PFS is an additional security protocol.
Select a PFS DH Group from the drop-down menu. As the DH Group number increases, the higher the level of
encryption implemented for PFS.
Select the Cipher and Hash from the drop-down menus. The proposal listing is evaluated in order with #1 being
the first proposal to attempt in IPSec negotiation.
Enter the number of seconds for the IPSec Lifetime. The period of time to pass before establishing a new IPSec
security association (SA) with the remote endpoint. The default value is 3600.
Summary of Contents for DIR-130 - Broadband VPN Router
Page 1: ......
