D-Link Technical
Support – How to setup an IPSec VPN connection between a DIR-130 and DI-80xHV
Page
5
of
10
Configuration of DI804HV/808HV
Step 1:
Open your web browser and type in the IP address of the router (
192.168.0.1
by
default). Enter the username (
admin
by default) and password (blank by default), and then
click
OK
.
In our setup we changed the IP of the unit to 192.168.1.1 (NOTE both routers can not be
on the same subnet).
Step 2:
Click on the
Home
tab and select the
VPN
button and configure as followed:
•
VPN:
check to enable
•
Max. number of tunnels:
enter the number of tunnels
ID 1
•
Tunnel Name:
enter a name of the VPN
•
Method:
select IKE
Click
Apply
to save the settings.
