16
D-Link DHP-W310AV User Manual
Section 3 - Configuration
Wireless Settings
Service Set Identifier (SSID) is the name
of your wireless network. Create a name
using up to 32 characters. The SSID is case-
sensitive.
The
Auto Channel Scan
setting can be
selected to allow the DHP-W310 to choose
the channel with the least amount of
interference.
By default the channel is set to 1. The
Channel can be changed to fit the channel
setting for an existing wireless network or
to customize the wireless network. If you
enable Auto Channel Selection, this option
will be greyed out.
WPA/WPA2 is more secure than WEP. WEP
should only be used if you have older
devices that are unable to use WPA. Use of
TKIP/AES security framework provides the
optimum mix of security and compatibility.
Please refer to “Wireless Security” on page 34
for more information.
Choose a password that is strong. A good password uses both letters and numbers in unpredictable places. Example bad
passwords could be
password
or
12345678
.
Wireless Network
Name:
Enable Auto
Channel Scan:
Wireless Channel:
Wireless Security &
WPA:
Password:
The DHP-W310AV lets you customize your wireless settings for your access point. This device allows you to extend your current network so you can
roam about the house while staying connected the entire time.
