11
D-Link DHP-P700AV
Section 2 - Installation
Step 3: Second Adapter
Within two minutes of pushing the Simple Connect button on the first adapter, press the Simple Connect button on the
second adapter in your Powerline network for no more than three seconds. The Power LED will start blinking when you
release the button.
Note:
Both Simple Connect buttons must be pressed within two minutes.
Step 4: Adding More Adapters (Optional)
If you would like to add more than two adapters, press the Simple Connect button of the additional adapter for no more
than three seconds. The Power LED will start blinking after you release the button.
Then press the Simple Connect button of any adapter in your existing Powerline network for no more than three seconds.
The Power LED will start blinking after you release the button.
After performing the steps above, your Powerline network will be securely configured with the same network encryption
key. The adapters will store the security settings even if they are unplugged.
Note:
To change the private encryption key, please reset the adapter back to its default value by pressing the reset button
for five seconds, then follow the security setup procedure above.
